おのたく日記 YouTubeも始めました→

■ [ZFS][HDD] HDDやはり壊れた

ZFSからエラーのメールを頂いていたのを、昨日の日記で書いたけど、今日はSMARTからもメールが来た。

# smartctl -l error /dev/sdb
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.0-2-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 2
       CR = Command Register [HEX]
       FR = Features Register [HEX]
       SC = Sector Count Register [HEX]
       SN = Sector Number Register [HEX]
       CL = Cylinder Low Register [HEX]
       CH = Cylinder High Register [HEX]
       DH = Device/Head Register [HEX]
       DC = Device Command Register [HEX]
       ER = Error register [HEX]
       ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 42730 hours (1780 days + 10 hours)
 When the command that caused the error occurred, the device was active or idle.
 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 40 51 d8 a0 a2 d4 0f  Error: UNC 216 sectors at LBA = 0x0fd4a2a0 = 265593504
 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 25 00 00 78 a2 d4 e0 08   3d+14:16:29.677  READ DMA EXT
 35 00 58 50 e7 79 e0 08   3d+14:16:29.677  WRITE DMA EXT
 b0 d0 01 00 4f c2 00 08   3d+14:16:29.489  SMART READ DATA
 35 00 90 e0 75 48 e0 08   3d+14:16:29.489  WRITE DMA EXT
 ef 10 02 00 00 00 a0 08   3d+14:16:29.489  SET FEATURES [Enable SATA feature]

Error 1 occurred at disk power-on lifetime: 42722 hours (1780 days + 2 hours)
 When the command that caused the error occurred, the device was active or idle.
 After command completion occurred, registers were:
 ER ST SC SN CL CH DH
 -- -- -- -- -- -- --
 84 51 ba 46 83 61 08  Error: ICRC, ABRT at LBA = 0x08618346 = 140608326
 Commands leading to the command that caused the error were:
 CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
 -- -- -- -- -- -- -- --  ----------------  --------------------
 61 00 80 00 83 61 40 08   3d+06:13:43.240  WRITE FPDMA QUEUED
 61 00 50 00 82 61 40 08   3d+06:13:43.240  WRITE FPDMA QUEUED
 61 00 78 00 81 61 40 08   3d+06:13:43.239  WRITE FPDMA QUEUED
 61 a0 d8 10 d8 35 40 08   3d+06:13:43.239  WRITE FPDMA QUEUED
 61 80 48 50 73 10 40 08   3d+06:13:43.239  WRITE FPDMA QUEUED

というとこなので、2013年12月の日記から、5年近く使ったHDDも交換だね。3TB→8TBにする。